Description:
Elevate a large space. This type of equipment have little requirement on size, type and feature.
Widely applied to elevate powder, granular and lump materials, also for the milled material. Elevate tempreture below 250 Degrees Celsius materials.
Large transmission capacity. Elevate the capacity up to 15-800 cubic meters / hour.
Easy to operate, advanced design principle, less repairing, less wearing parts.
Reliable work performance.
Advanced design principle, make sure the machine work reliable.
| Bucket elevator is a continuous conveying machine for vertically lifting materials. It can adjust the conveying speed according to the conveying capacity, select the hoisting height as needed, and make the hopper and size according to the actual needs. It is suitable for the hoisting and feeding of food, medicine, chemical industry products, nuts and other products. |
Product Type:
1.Ring chain bucket elevator
2.Plate chain bucket elevator
3.Belt bucket elevator
Advantages:
Large transmission capacity. Elevate the capacity up to 15-800 cubic meters / hour.
Low energy consumption. This machine used for the flowing feed method, Gravity induced discharging the material. And use the Intensive large capacity hopper conveyor.
Low chain speed, but big transmission capacity, nearly no material flow back, so small drive power, Theoretical calculation Shaft power is 25%-45% for the Cycle chain elevator
Long use life. This kind of elevator used for the flowing feed mathod, between the material and hit, during the feed and elevating, seldom material will flow back, so this Prevent abrasive cost. Strengthed wear-resistant chain enlarge the use life of the chain and hopper. Actual use shows that: transport chain use life more than 5 years.
Lifting height high. with low speed of the chain speed, stable working, and used the strengthed wear-resistant chain, so the lifting height is higher.
Good sealing, reduce environmental pollution.
Technical Parameters of NE Series Bucket Elevator:
| Model | Lifting capacity | Bucket | Weight of operation parts | Max. size of materials |
| (m3/h) | Volume
(L) | Bucket gap (mm) | Bucket speed
(m/min) | Percentage (%) |
| 10 | 25 | 50 | 75 | 100 |
| NE15 | 15 | 2.5 | 203.2 | 29.8 | 28 | 65 | 50 | 40 | 30 | 25 |
| NE30 | 32 | 7.8 | 304.8 | 30.1 | 35 | 90 | 75 | 58 | 47 | 40 |
| NE50 | 60 | 14.7 | 304.8 | 30.1 | 64 | 90 | 75 | 58 | 47 | 40 |
| NE100 | 110 | 35 | 400 | 31 | 89 | 130 | 105 | 80 | 65 | 55 |
| NE150 | 170 | 52.5 | 400 | 31 | 112 | 130 | 105 | 80 | 65 | 55 |
| NE200 | 210 | 84.6 | 500 | 30 | 134 | 170 | 135 | 100 | 85 | 70 |
| NE300 | 320 | 127.5 | 500 | 30 | 188 | 170 | 135 | 100 | 85 | 70 |
| NE400 | 380 | 182.5 | 600 | 30 | 205 | 205 | 165 | 125 | 105 | 90 |
| NE500 | 470 | 260.9 | 700 | 30 | 223 | 240 | 190 | 145 | 120 | 100 |
| NE600 | 600 | 300.2 | 700 | 30 | 274 | 240 | 190 | 145 | 120 | 100 |
| NE800 | 800 | 501.8 | 800 | 30 | 313 | 275 | 220 | 165 | 135 | 110 |
